Kavan GO-1023MG
Erittäin vahva ja ohut (10mm) ohjelmoitava digitaalinen mikroservo 23g, jossa on metalliset hammaspyörät ja laaja syöttöjännitealue (4,8-8,4V), 2xBB, ihanteellinen siivekkeiden siivekkeisiin ja laskusiivekkeisiin. 4,5kg.cm vääntömomentti, 0,14s/60° nopeus 4,8V:ssa, 5,2kg.cm vääntömomentti, 0,12s/60° nopeus 6,0V:ssa, 6,5kg.cm vääntömomentti, 0,10s/60° nopeus 7,4V:ssa. Alumiininen servokotelo täydellistä jäähdytystä varten suuressa kuormituksessa.
Translated with DeepL.com (free version)
GO-1023MG (0.09s 7kg)
Very powerful programmable digital micro servo with steel gears and with output shaft mounted on two ball bearings for use in RC models of all types. Thanks to its flat servo case with height of 10 mm, it is particularly suitable for controlling ailerons and flaps in RC glider models with thin wing profiles. The servo is housed in an aluminium case for perfect cooling even under high loads.With the help of the USB programmer/interface for GO servos and the PC operator program you can program a wide range of servo parameters (servo end-points, servo reverse and neutral position, overload protection, soft start, fail-safe, etc.).
Servo dimensions Micro Servo type Digital Thrust at 4.8V [kg/cm] 4.5 Thrust at 6.0V [kg/cm] 5.2 Thrust at 7.4V [kg/cm] 6.5 Thrust at 8.4V [kg/cm] 7 Speed at 4.8V [s/60st.] 0.14 Speed at 6.0V [s/60st.] 0.12 Speed at 7.4V [s/60st.] 0.1 Speed at 8.4V [s/60st.] 0.09 Servo gears Metal Ball bearings 2× High-voltage Yes Power supply [V] 4.8 - 8.4 Length [mm] 30 Width [mm] 10 Height [mm] 30.5 Weight [g] 23 Intended for Aeroplanes
