OMP Hobby Edge 540 ARF Keltainen 60"
Semiskaala malli amerikkalaisesta taitolentokoneesta, suuniteltu 1200-1600W sähkömoottorille.
Soveltuu taitolennätykseen ja 3D lennätykseen.
Rungon rakenne on ultrakevyt, ja siinä on balsa- vaneri, Kevlar/hiilikomposiittivahvisteiset osat.
Irroitettava lasikuituinen cowlinki, iso irroitettava kabiini mahdollistaa helpon akunvaihdon.
Kaksiosainen balsarakenteinen siipi, jossa on symmetrinen profiili, hiilikuituputki yhdistää siivet ja rungon. Siiven puoliskot kiinnitetään runkoon ruuveilla.
Siipiin asennetaan omat servot siivekkeille.
Peräsimien servot asennetaan takarunkoon.
Edge 540 on päällystetty Oracover kalvoilla.
Pääteline on hiilikuitua, pyöräkotelot ovat lasikuitua.
Tekniset tiedot:
Kärkiväli: 1524mm
Pituus: 1500mm
Siiven pinta-ala: 42.3dm2
Paino: 2750-2850g
Moottori: esim. T-Motor AM600
OMP 60" Edge 540 ARF Yellow
A semi scale model of the American aerobatic aeroplane for 1,200-1,600 W brushless electric motor for experienced pilots capable of the classic pattern as well as extreme 3D style.
The fuselage is of - now classic - ultra light design featuring balsa and plywood Kevlar®/carbon composite reinforced parts, detachable fibreglass cowl and large fuselage/canopy hatch allowing perfect access to the entire power system and RC gear. The engine or motor is to be fitted to a plywood/composite reinforced box using a radial mount.
The two-piece all-balsa wing with a symmetrical airfoil uses a carbon tube joiner; the wing halves are secured with screws to the fuselage. The large ailerons are controlled by a single servo each. You can install the supplied SFG winglets to the wing tips.
The empennage is a light all-balsa work; the horizontal tailplane is a single-piece, glued into the fuselage. The elevator and rudder are controlled by servos installed in the tail part of the fuselage.
The entire model is covered by the ULTRACOTE® iron-on film (ULTRACOTE® is the trade mark for the ORACOVER® film used in the USA.)
The main undercarriage features carbon composite legs, fibreglass spats and lightweight wheels; the tail wheel with a carbon bracket is coupled with the rudder.
You will need 1,200-1,1600 W brushless electric motor and a 3300-4000mAh 40C 6S LiPo pack.
You will need at least 4-channel RC set to control your Edge 540 but 6-channel computer radio i preferred - the precise set-up of servos, optimized dual and exponential rates is the must for aerobatic flying - the pattern as well as extreme 3D.
You will need 4 fast and strong digital mini servos
