Super EZ V4 Reflex-Gyro RTF V2

• Wingspan: 1220mm
• Overall Length: 1020mm
• Flying Weight: 890g
• Motor: BL3136-KV1200
• ESC: 20A
• Servo: 4x 9g Servo
• Radio: 4 Channels
• CG (center of gravity): 55-65mm (From leading edge)
• Prop: 2-blade 10x5
• Battery: LiPo 11.1V 1300mAh 25C
• Aileron: Yes
• Elevator: Yes
• Rudder: Yes
• Flaps: No
• Retracts: No
• Approx. Flying Duration: 8min
• Minimum Age Recommendation: 14+
• Experience Level: Beginner
• Recommended Environment: Outdoor
• Assembly Time: 30 minutes
• Is Assembly Required: Yes
• Material: Durable EPO
• Requires: Alkaline batteries to the transmitter

• Utilizes a high-speed 32-bit ARM processor onboard.
• Sensors: Solid-state 3 axis gyro and 3 axis accelerometer.
• Automatically recognizes SBUS/PPM/PWM systems, compatible with all radio systems with 4 channels or above.
• Easy operation: the Reflex system is programmed specifically for the aircraft it is connected to. No further programming is needed. The user only needs to connect their receiver to the gyro and setup the aircraft normally.

• Stabilized, Optimized or off.
• This is controlled with a 2 or 3 position switch on the transmitter. When assigned to a 2 position switch, the Reflex system switches between stabilized and optimized modes.
• If the transmitter does not have adequate auxiliary channels, the included jumper should be used to change the control mode of the Reflex system.

Designed for beginners, Reflex will rapidly level the aircraft from any attitude when this mode is activated. Stabilized mode combines accelerometer and gyro data to determine how to level the aircraft when the control sticks are released giving pilots absolute peace of mind.
 

Turns off all gyro functionality, the aircraft is flown completely manually when the gyro is off.

Utilizing advanced solid-state gyros, the Reflex system maintains aircraft attitude by counteracting inflight upsets- from gusts to crosswinds. With Reflex, even small aircraft will fly with the confidence of something much larger!